# "Rate limit exceeded" error message when log in

**URL:** <https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196>\
**Category:** Questions\
**Tags:** v3\
**Created:** [December 9, 2021, 9:19am UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196 "2021-12-09T09:19:48Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![gillesvauvarin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.getkirby.com/gillesvauvarin/32/2351_2.png) [@gillesvauvarin](https://forum.getkirby.com/u/gillesvauvarin)\
**Post date:** [December 9, 2021, 9:19am UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/1 "2021-12-09T09:19:48Z")

</div>

Hello,

One of my customer try to connect to a Kirby 3.6 website I’ve made recently and he get a “Rate limit exceeded” error message.

I do not have this problem from my computer.

If he tries to connect with a wrong login/psw, is it an expected error message after several attempts?

Does anyone have a possible explanation?

---

<div class="post-metadata">

**Author:** ![texnixe](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.getkirby.com/texnixe/32/5754_2.png) [@texnixe](https://forum.getkirby.com/u/texnixe)\
**Post date:** [December 9, 2021, 9:59am UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/2 "2021-12-09T09:59:54Z")

</div>

> [@gillesvauvarin](#):
>
> Rate limit exceeded

This message is thrown in 2locations, in the `validateEmail()` method and in the `verifyChallenge()` method. Since your customer is loggin in with email, not with code, I assume it comes from the `validateEmail()` method when the IP is blocked after too many attempts to log in.

---

<div class="post-metadata">

**Author:** ![lukasbestle](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.getkirby.com/lukasbestle/32/11437_2.png) [@lukasbestle](https://forum.getkirby.com/u/lukasbestle)\
**Post date:** [December 9, 2021, 10:03am UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/3 "2021-12-09T10:03:06Z")

</div>

Yep, Kirby limits login attempts by IP address and by email address. This is also why you don’t get the same error from your IP address and with your email address.

You can reset the rate limit by deleting the `site/accounts/.logins` file on the server.

---

<div class="post-metadata">

**Author:** ![gillesvauvarin](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.getkirby.com/gillesvauvarin/32/2351_2.png) [@gillesvauvarin](https://forum.getkirby.com/u/gillesvauvarin)\
**Post date:** [December 9, 2021, 10:14am UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/4 "2021-12-09T10:14:40Z")

</div>

Thanks @texnixe and @lukasbestle for these explanations. I think my customer tried to connect with a wrong log/psw, I will check closer with him.

---

<div class="post-metadata">

**Author:** ![dsim412](https://avatars.discourse-cdn.com/v4/letter/d/3d9bf3/32.png) [@dsim412](https://forum.getkirby.com/u/dsim412)\
**Post date:** [September 22, 2023, 7:04pm UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/5 "2023-09-22T19:04:29Z")

</div>

i don’t see a .logins file. is there another way to reset the ‘Rate limit exceeded’ error?

---

<div class="post-metadata">

**Author:** ![lukasbestle](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.getkirby.com/lukasbestle/32/11437_2.png) [@lukasbestle](https://forum.getkirby.com/u/lukasbestle)\
**Post date:** [September 22, 2023, 7:16pm UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/6 "2023-09-22T19:16:03Z")

</div>

The tries are only stored in the `.logins` file. Because its filename starts with a dot, it may be hidden. Please check if you enabled the display of hidden files.

---

<div class="post-metadata">

**Author:** ![dsim412](https://avatars.discourse-cdn.com/v4/letter/d/3d9bf3/32.png) [@dsim412](https://forum.getkirby.com/u/dsim412)\
**Post date:** [September 22, 2023, 7:20pm UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/7 "2023-09-22T19:20:51Z")

</div>

all i see in the **site/accounts** are the individual account folders, no .logins file. i can see other files that start with a dot (eg: .htaccess) so i know that’s not the issue. my client is running into this same ‘Rate limit exceeded’ error and i need to reset it.

![image](https://europe1.discourse-cdn.com/flex017/uploads/getkirby/original/2X/d/d0e5b02324b24af619cce4ec99ae2d4496f438bd.png)

---

<div class="post-metadata">

**Author:** ![dsim412](https://avatars.discourse-cdn.com/v4/letter/d/3d9bf3/32.png) [@dsim412](https://forum.getkirby.com/u/dsim412)\
**Post date:** [September 22, 2023, 7:31pm UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/8 "2023-09-22T19:31:16Z")

</div>

fyi, i’m running Kirby version 3.6.2 if that’s helpful

---

<div class="post-metadata">

**Author:** ![dsim412](https://avatars.discourse-cdn.com/v4/letter/d/3d9bf3/32.png) [@dsim412](https://forum.getkirby.com/u/dsim412)\
**Post date:** [September 22, 2023, 7:37pm UTC](https://forum.getkirby.com/t/rate-limit-exceeded-error-message-when-log-in/24196/9 "2023-09-22T19:37:04Z")

</div>

i refreshed the directory listing and sure enough, the .logins file appeared. not sure what happened. thanks for your response!
